SlickRide

Shock and Vibration Mitigation Tool

Slickride is a shock and vibration mitigation tool that works with standard servo pulsers and lower end main valves to protect downhole equipment against damage in harsh drilling conditions. Slickride is specifically designed to mitigate the damaging effects brought on by the use of agitation devices in the drill string. 

Slickride uses no elastomeric parts in its shock isolation system and as such is capable of being run in hot hole environments. In addition, Slickride implements a dedicated viscous damping system in addition to a tuned spring-mass assembly to provide true second order frequency attenuation with little or no gain at resonance. 

Slickride provides piston compensation to the oil filled volume and eliminates any potential issues with bladder damage under high impact loading and also utilized belleville disc springs for extremely high load capacity. In addition, the resonant frequency of the Slickride tool can be adjusted by modifying the spring stack-up during the assembly process to adapt to agitation devices of various operating frequencies. 

Slickride has been designed with a firm focus on effectiveness, longevity and affordability. Routine maintenance of the Slickride shock and vibration mitigation tool is simple to perform. A standard rebuild including teardown, rebuild and reassembly can be completed in less than an hour. 

In a market where cost is just as important as reliability and durability, Slickride helps mwd operators keep their repair and maintenance costs low and increases the survivability of their downhole equipment in high shock and vibration environments. 

Specifications
Nominal Length25.02” (635.5mm)
Housing O.D.1.875” (47.6 mm)
Centerlizer Upset Diameter2.125” (59.98mm)
Centralizer O.D.3.25” (82.55mm)
Operating Temperature32° to 347°F (0° to 175°C)
Shock Rating1000g, 0.5ms, ½ sine, 10 times, all three axes
Vibration Rating5-30Hz@1” double amplitude, 30-500Hz 20grms all axes
Pressure Rating20,000 psi (137,895kPa)
Maximum Axial Load2500lbf (11,120N)
Maximum Axial Shaft Travel1.00” (25.4mm)
3dB Frequency~7 Hz to ~20Hz (spring adjustable)
Attenuation40dB at twice the resonant frequency

Slickride Facts

  • Effective shock and vibration mitigation
  • Fully retrievable and reinsertable
  • 175°C, 20,000 psi rated
  • Optimized hydraulic viscous damping
  • High load adjustable springs
  • Exceptionally rigid radial bearings
  • Integrated centralizer

Download Product Brochure

Download